Advertisement
Quick Links
AUNTI
SEWING MACHINE CABINET
OWNER'S MANUAL
Where Creativity Meets Color!
Assembly Instructions
Model Numbers:
900 Oak
901 White
903 Black
Piece of cardboard and styrofoam need to be saved for Step 14!
IMPORTANT: Please read these instructions before assembling!
Advertisement
Related Manuals for Arrow Auntie 900
Summary of Contents for Arrow Auntie 900
- Page 1 AUNTI SEWING MACHINE CABINET OWNER’S MANUAL Where Creativity Meets Color! Assembly Instructions Model Numbers: 900 Oak 901 White 903 Black Piece of cardboard and styrofoam need to be saved for Step 14! IMPORTANT: Please read these instructions before assembling!
- Page 2 Please retain this information for future reference. ARROW WARRANTY Thank you for your purchase of an Arrow Sewing Cabinet! Thank you for your purchase! Our products have a three-year warranty from the date of shipment from our facility that covers manufacturer defects plus a 15 day warranty for any shipping damages.
- Page 3 • Production ID Number 1-800-533-7347 • Number of Part Required Arrow Cabinets • Your Name, Address, and Phone Number P.O. Box 307, Delavan, WI 53115 TO ORDER REPLACEMENT PARTS CALL 1-800-533-7347 Wooden Materials Parts are labeled with capital letters.
-
Page 4: Hardware Included
Hardware Included Connecting Bolts x21 Cams x21 Drawer Runners x8 #6x1” Flathead Screw x32 DrawerCams x8 Drawer Connecting Bolts x8 10mm Hex Bolt x8 10mm Hex Nuts x8 Washers x8 Wood dowel x4 Drawer Wood dowel x8 #10x1-1/4” Flathead Screw x16 #1x1/2”... -
Page 5: Cabinet Assembly
Understanding How the “ARROW-LOC” Cam Fastener Works 180° ARROW TOWARDS HOLE IN EDGE! Position bolt in Press cam Into pre-drilled Insert bolt through pre-drilled To lock, rotate cam pre-drilled hole and hole until flush with surface. hole in edge of panel. - Page 6 After attaching the runners, insert the wood with the surface. The arrow on the Cams should dowels (4) in the Front Brace (Q) & Back Brace (P), be turned (using a regular screwdriver or Allen shown in FIG.
- Page 7 Step 3. Attach the plastic brown Drawer Runners DO NOT OVER TIGHTEN. If the brown plastic by using #6x1” Flathead Screws (x32) to the around the screw holes turns white, you have over Partition (F) & Right Side (H) as shown In FIG. 3. tighten and the drawers won’t fit! DO NOT OVERTIGHTEN #6x1”...
- Page 8 Step 5. Attach Front Brace (Q) on back side of (Q) will face down while rough edge will face up. Front (K) using 1-1/2” Screws (x3) as shown In Attach the Handle with 3/4” Bolts (x2) included in FIG. 5. The Front Brace (Q) will overlap the Front bag to the Front (K).
- Page 9 Step 7. Attach Partition (F) by guiding the Brace (P) to enter holes in the Partition (F) (as Connecting Bolts into holes in the Back Brace (P), shown In FIG. 7). Turn cams to locked position Back (O), and Front Assembly (K & Q) also allow when complete.
- Page 10 Step 9. Place Clips and Inserts, in that order (x5), “LOCKING” type in front, NON -LOCKING” in the where indicated on bottom of Side Panels (G & rear and on Partition. H) and Partition(F). It is VERY important to put To get casters in you may place a wood block or caster clip on first and then tap caster insert into towel over caster to protect it, then tap hard with...
- Page 11 Step 10. Attach Support Hinges (x4) to Right Cover the magnet with a wood block and tap hard and Left Supports (I & J) with #7x518” Flathead to get magnet in the hole. Attach rubber tabs to Screws (x8); Insert Round Magnets (x2) into Leaf Supports (I &...
- Page 12 Step 12. Attach lift Panel (V) with airlift attached Place the last 2 Carriage Bolts through the 2 holes to cabinet Back (0) and Back Brace (P) with 1/4”x2” on the Back Brace (P). Before tightening all 4 bolts Carriage Bolts (x4). down take a hammer to tap bolt completely into Hang the top 2 Bolts in cabinet Back (0) put on washer the Back Panel (0) and Back Brace (P), so the head...
- Page 13 Step 14. Remove Universal Insert from inside the Close the Leaves (A & B) as shown in FIG. 14A. top as shown in FIG. 14. Sewing Insert x1 FIG. 14 FIG. 14A Step 15. Once Top Assembly (A, B, C) is on securely, Open the Leaves (A &...
- Page 14 Step 16. The opening you set your sewing machine The following instructions will help you level the on in the cabinet Is quite large. Platform (U). You will need the styrofoam from The opening allows the cabinet to accommodate the box, a sheet of cardboard from the box & a 10 larger sewing machines, but makes it difficult to mm wrench and an adjustable socket wrench.
- Page 15 Step 18. Place 5/8” styrofoam from the box contents under the Top at the back of the unit, as shown in Fig. 17. FIG. 17 Step 19. Take metal wings and attach them to the airlift carriage using the 10 mm hex nut bolts (x8), 4 bolts per wing.
- Page 16 Step 21. Cut cardboard sheet from box contents into 6-8 strips of 6” long x 2” wide strips. If the cardboard is too thick use an envelope folded in half. Step 22. Place cardboard strips around the Platform (U) to keep the Platform square, as shown in FIG.
- Page 17 the platform while another tightens the hex nut Step 24. Using 2 people, a 10mm wrench and an bolts (x8) down. The even pressure applied will adjustable wrench tighten down the hex nut bolts help the platfom to not rise up. Make sure the (x8) on the metal wings and airlift carriage.
- Page 18 Step 26. Thread Connecting Bolts (8 total) into The Drawer may now be installed into your cabinet as shown. The middle slot of the drawer side, slides onto pre-drilled holes in Drawers Front (R, Sx3). the drawer runner. Do not place the drawers on top of Install Cams (8 total) in Drawer side (Zx4, Wx4) by the drawer runners.
- Page 19 Adjusting the Platform Height for the Flatbed The Air Lift has 3 positions for your sewing machine: storage, flatbed and freearm. The flatbed position is the second position on the Air Lift and is the position most sewers will sew in. The tip of the needle on your sewing machine should be level with the edge of the cabinet for proper positioning in the flatbed position as seen in the below picture.
- Page 20 Your Airlift Sewing Cabinet has 3 separate positions on the mechanism. (1) Freearm or the top position, (2) flatbed or the second position on the mechanism and (3) storage the final position. A plastic universal insert comes with your cabinet. This insert is to be used only in the flatbed position of the cabinet.
- Page 21 How To Work the Air Lift Mechanism The Air Lift has 3 positions for your sewing machine: storage, flatbed and freearm. Follow these simple instructions to move the Air Lift into the 3 Different Positions: 1. Once your cabinet is fully assembled you can begin moving the Air Lift. 2.
- Page 22 Various Instructions How the drawer stops work. Place screw for stop on loosely, so the stop can rotate if you want to pull the drawer out fully. How the Universal Insert Works If you do not like the universal insert a custom insert can be purchased, call us for details.
- Page 23 To Make Your Own Curtain to Hide your Machine MATERIALS NEEDED: 7/8 yard of fabric Cut fabric to 29”by width of fabric. Cut into 2 pieces by cutting at the fold. You will now have 2 pieces measuring 22” x 29”. Width may vary due to the width of fabrics.
- Page 24 Wood Parts and Part Numbers Left Leaf Right Leaf Left Side Panel Right Side Panel Front Partition Back Front Brace Compartment Bottom Drawer Top Front Back Compartment Back Back Brace Drawer Front Platform Drawer Back Right Leaf Left Leaf Support Support Drawer Side Left Drawer Side Right...
- Page 25 Wood Parts and Part Numbers Ref. Description Part# Part# Part# Cabinet Model# 900 (Oak) 901 (White) 903 (Black) Right Leaf 005152 0051520 005152B Lett Leaf 005153 0051530 005153B 005154 0051540 005154B Lift Panel 005167 0051670 005167B Platform 005164 0051640 005164B Partition 005155 0051550...
- Page 26 Hardware Included with Part Numbers Auntie Sewing Machine Cabinet Page 24 Assembly Instructions...
- Page 27 Hardware Included with Part Numbers Item Description Part No. Item Description Part No. 000709 003177 19mm Cam Handle 002892 002733 Connecting Bolts Leaf Hinge 001319 003192 Carriage Bolt 8/32x1” Metal Knob Bolt 003175 003174 10 mm Hex Bolt Self Sticking Rubber Tab 000220 003191 Zinc Flat Washers...
- Page 28 Enhance your sewing experience with a custom-made Our sewing chairs are designed to provide comfort, insert for your Arrow or Kangaroo cabinet. Inserts are support, and the fashionable look you want for your designed to reduce the gap between the machine space.