Advertisement
STEP 1
Install the lifting columns (1 & 2).
C
x16
F
4mm
STEP 2
Install the leg beams (8).
E
x8
G
5mm
Note the leg beam
orientation: the side
with the rivet nut
facing inwards.
STEP 3 (OPTIONAL)
C
x4
F
4mm
Please pay attention to the left or
right lifting column.
with screw (E) and tighten with 5mm allen key (G).
Install the screen bracket screws.
Connect the columns (1 & 2) to the leg beam (8)
Leg beam (8)
Start the screws (C) into the leg beam (8) with
4mm allen key (F) but do not tighten completely.
TOP TIP
For each component, always start
all screws in their threads before
tightening any screw fully.
Insert the lifting columns (1 & 2)
into the ends of the supporting
beam (4). Fix with screws (C)
and allen key (E).
E
Attach plastic cover
Screws not
fully tightened
Advertisement
