Huawei UPS5000-H-400K-FT Manual page 159

UPS5000-H-(400 kVA-600 kVA)-FT
User Manual (100 kVA Power Module)
Figure 5-3 Documentation QR code on the cabinet
(1) Documentation QR code
Figure 5-4 About
(1) Authentication code
Step 2 Choose System Info. > Runn. Info. > Wireless Module on the LCD. Confirm that
the 4G module dial-up is successful and check the signal strength.
Step 3 Connect the device on the NetEco app.
----End
4G Module Access Scenario (WebUI)
Step 1 Set wireless module parameters.
Choose Monitoring > Wireless Module > Running Parameter on the WebUI. Set
Mobile data to Enable and set operator parameters based on site requirements.
Step 2 Check the running status of the wireless module.
Issue 03 (2022-11-29) Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Single UPS Commissioning
(2) Authentication code
151