UPS5000-H-(400 kVA-600 kVA)-FT
User Manual (100 kVA Power Module)
2.5.3 600K
Figure 2-9 Exterior and interior
(1) Bypass input switch
(4) Installation position for the
surge protection box
(7) Intelligent detection card
(10) Maintenance bypass
switch
2.6 Component Description
2.6.1 Power Module
The power module consists of a power factor correction (PFC) rectifier and
inverter. It performs AC/DC or DC/DC conversion on the mains and battery inputs,
and stabilizes the DC bus voltage. The inverter (DC/AC) converts the inputs into
sine wave outputs.
Issue 03 (2022-11-29)
NO TE
● Switches share one switch handle. Take out the handle when you operate different
switches and reinstall it after the operations are complete.
● An optional ECM extended subrack can be installed at the position of the filler panel
above the control module.
● If the UPS BOM number is 02314BMV, the maintenance bypass switch is reserved.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Mains input switch
(5) Switch handle
(8) Bypass module
(11) Output switch
2 Product Overview
(3) MDU
(6) Control module
(9) Power modules
(12) Filler panel
34