Removing And Replacing The Motherboard - Keysight Infiniium S Series Service Manual

5
Replacing Assemblies

Removing and Replacing the Motherboard

1
2
3
4
If you need to replace the battery on the motherboard, it is a Rayovac BR2032.
92
Remove the processor assembly as described earlier.
Remove the six M3 screws from the motherboard. When replacing, torque the
screws to 5 in-lbs.
Slide the locking plate off of the four tabs, away from the I/O. If any cables are
in the way you may want to disconnect them, though it is not necessary.
When the replacement motherboard has non-functional audio connectors, be
sure to affix the motherboard I/O label and insert the audio connector port caps
that come with the replacement motherboard kit.
S-Series Oscilloscopes Service Guide