Removing And Replacing The Front Panel, Bezel, Keyboards, Display/Touch Screen Assembly, And Autoprobe Board - Keysight Infiniium S Series Service Manual

Removing and Replacing the Front Panel, Bezel, Keyboards,
Display/Touch Screen Assembly, and AutoProbe Board
1
2
3
S-Series Oscilloscopes Service Guide
Disconnect the power cable and remove the handle, rear cover, and rear fan
assembly as described in the previous section.
To begin removing the front panel, disconnect the two USB cables and the
LVDS cable from the motherboard.
Disconnect the front panel power cable from the acquisition assembly.
5
Replacing Assemblies
79