Data Logging - ECD SmartDRY SD Series Setup And Operation Manual

9.3.3 DATA LOGGING

The time between logging is set to 6 minutes (10 reading per hour) at the factory. This can be changed to any
value between 1 and 60 minutes. The internal memory uses a first in/first out (FIFO) storage method and can
store up to 8,000 RH/Temp measurements or Events, such as Alarms or Power lose, etc. This is sufficient for
about 30 days of recorded history before the oldest data starts to be deleted as new data is logged.
To access the Data Logging Menu:
1) From the Main Display, enter the Main menu by pressing the Menu button. enter the Other Settings
menu by pressing the Settings button.
SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 59