Setup; Viewing Initial Ecd Smartdry™ Data - ECD SmartDRY SD Series Setup And Operation Manual

7.3 SETUP

1. Connect the ECD SmartDRY™ Cabinet to the Network via cable. SmartDRY™ acquires an IP Address
from the Network. This will then be the URL Address for the SmartDRY™ Network.
2. Get IP address assigned by your Network.
a. From the ECD SmartDRY™ Control Panel:
i. Select Menu > Other Settings.
ii. Scroll down to the Network Menu and Press OK.
iii. Log and use the assigned IP address as the web address for your web browser to access
SmartDRY™ Network. For example: http://10.1.1.999.
7.4 VIEWING INITIAL ECD SMARTDRY™ DATA
1. On initial load of your SmartDRY™ Network using your IP address, you'll be able to view current state
of your Cabinet.
a. Graph:
i. Display RH, Temperature, Door Activity Graph.
b. Real Time Status
i. RH, Temperature, Door Activity.
ii. Color Indicators: (Red, Yellow, Green, White)
iii. Events:
1. Door Open
iv. ECD SmartDRY™ Status and Settings:
1. SmartDRY™
2. SmartBAKE™
v. Alarms
vi. Fan and Desiccant Indicators.
SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 27