Quick Start - ECD SmartDRY SD Series Setup And Operation Manual

8.0 QUICK START

This Quick Start Guide is designed to help the user to familiarize themselves with the equipment and perform
basic setup. For detailed information, please refer to the Setup and Operation Manual.
The ECD SmartDRY™ Cabinet is ready to plug in and begin using as soon as it is safely set up. No additional pro-
gramming is required. Once unpacked, here are some steps to quickly get your Cabinet up and running.
Although pre-programmed, the Cabinet must run for a minimum of 8 hours to acclimate and regenerate its
dryer module. Please allow this time before adding your filiment. Also, the alarm limits have been pre-pro-
grammed however, are not enabled. Once the Cabinet has stabilized at set point, the alarms can be enabled if
desired. You may also want to explore the other Alarms: SmartDRY™ Temperature, SmartBAKE™ RH, and
SmartBAKE™ Temperature, enabling them as you wish. Refer to section 9.1.2 Alarms (SmartDRY™) in the
Setup and Operation Manual for detailed information.
SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 28