5.5 FILIMENT REEL RACK PLACEMENT
Cabinet Filiment Reel Racks are held in place on each side by a support bracket that slips into pre-cut slots. The
support brackets are symmetrical and can be used to support either the left or right side of the filiment reel
rods. Slots are pre-cut to prevent blocking of air vents and LED lighting in addition to fitting most common
reels; place as needed to meet your needs.
To install:
1) Open an cabinet door.
2) Insert the support brackets into the desired location of the tracks making sure they are both on the
same track notch and secure.
SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0
Page 11