Data Logging - ECD SmartDRY SD Series Setup And Operation Manual

9.3.3 DATA LOGGING

The time between logging is set to 6 minutes (10 reading per hour) at the factory. This can be changed to any
value between 1 and 60 minutes. The internal memory uses a first in/first out (FIFO) storage method and can
store up to 8,000 RH/Temp measurements or Events, such as Alarms or Power lose, etc. This is sufficient for
about 30 days of recorded history before the oldest data starts to be deleted as new data is logged.
To access the Data Logging Menu:
1) From the Main Display, enter the Main menu by pressing the Menu button. Enter the Other Settings
menu by pressing the Settings button.
2) Enter to the Log Settings by pressing the Log button. Select the Log Interval field to make active. Use
the Up or Down button to adjust the desired value.
3) Once completed, select the OK button to accept the new value.
THE LOG SCREEN PROVIDES ACCESS TO CLEAR THE STORED MEMORY. PERFORMING THIS STEP
CLEARS UNWANTED DATA AND STARTS LOGGING DATA NEW DATA FROM THIS POINT ON.
SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0 Page 48