Rh Setpoint - ECD SmartDRY SD Series Setup And Operation Manual

9.1.1 RH SETPOINT

The dry RH value that ECD SmartDRY™ is set to maintain. SmartDRY™ mode is a dryer and thus can only re-
move moisture from the interior of the cabinet. Drying stops when the measured RH reaches the set point and
resumes when the measured RH value rises 0.5% above the set point.
To access the RH Setpoint setting:
1) From the Main Display, enter the Main menu by pressing the Menu button. enter the SmartDRY™ Set-
tings by pressing the Dry button.
SD Series Dry Cabinets Setup and Operation Manual | A62-3337-00 Rev: 1.0.0 Page 39