5.5 SHELF PLACEMENT
Cabinet Shelves are held in place on each side by a shelf support that slips into pre-cut slots. The shelf sup-
ports are symmetrical and can be used to support either the left or right side of the shelf. Slots are pre-cut to
prevent blocking of air vents and LED lighting in addition to fitting most common parts bins, boxes and reels;
place as needed to meet your needs.
To install:
1) Open an cabinet door.
2) Insert the shelf supports into the desired location of the shelf tracks making sure they are both on the
same track notch and secure.
SD Series Dry Cabinets Setup and Operation Manual | A55-7379-00 Rev: 2.0.0
Page 16