M.2 Wlan Module Replacement; Remove The M.2 Wlan Module - Lenovo ThinkSystem SE350 Maintenance Manual

Table 28. M.2 LTE module installation
M.2 LTE module cable
1
Washer
2
After you install the M.2 LTE module, complete the following steps:
1. Install the node if needed (see
2. Reconnect power cords and all external cables.

M.2 WLAN module replacement

Use this procedure to remove or install the M.2 WLAN module.

Remove the M.2 WLAN module

Use this information to remove the M.2 WLAN module.
Before you remove the M.2 WLAN module, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• "Installation Guidelines" on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see
page 16).
3. Remove the node from the enclosure if needed (see
4. Remove a LTE/WLAN Antenna (see
5. Remove the M.2 WLAN/LTE wireless adapter (see
page 41).
To remove the M.2 WLAN module, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
DkEpH4SzvKZck4f6rVRzUE
Step 1. Remove the M.2 WLAN module cables from the cable clip.
"Install a node" on page
"Remove a LTE/WLAN Antenna" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Nut
3
101).
"Remove a node" on page
"Remove the M.2 WLAN/LTE wireless adapter" on
.
Chapter 3 Hardware replacement procedures
"Power off the server" on
98).
78).
91