Install The Lock Position Switch - Lenovo ThinkSystem SE350 Maintenance Manual

Figure 63. Lock position switch removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.

Install the lock position switch

Use this information to install the lock position switch.
Before you install the lock position switch, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• "Installation Guidelines" on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see
page 16).
To install the lock position switch, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
DkEpH4SzvKZck4f6rVRzUE
Step 1. Hook the lock position switch onto the pin; then, slightly push it leftward.
Step 2. Install and fasten the screw.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Power off the server" on
.
Chapter 3 Hardware replacement procedures
77