Install The Tpm Card; Only) - Lenovo ThinkSystem SE350 Maintenance Manual

2. Turn off the server. Disconnect the power cords and all external cables (see
page 16).
3. Remove the node from the enclosure if needed (see
To remove the TPM card (for Chinese Mainland only), complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
DkEpH4SzvKZck4f6rVRzUE
Step 1. Press and hold the release latch.
Step 2. Lift the TPM card (for Chinese Mainland only) out of the server.
Figure 152. TPM card (for Chinese Mainland only) removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the TPM card (for Chinese Mainland only)
Use this information to install the TPM card (for Chinese Mainland only).
Before you install the TPM card (for Chinese Mainland only), complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• "Installation Guidelines" on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see
page 16).
3. Touch the static-protective package that contains the new TPM card to any unpainted surface on the
outside of the server. Then, take the new TPM card out of the package and place it on a static-protective
surface.
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
144
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Remove a node" on page
"Power off the server" on
98).
"Power off the server" on