Air Baffle Replacement; Remove The Air Baffle - Lenovo ThinkSystem SE350 Maintenance Manual

Figure 34. PCIe adapter installation
Table 22. PCIe adapter installation
Adapter retainer
1
After you install the PCIe adapter, complete the following steps:
1. Install the PCIe riser assembly (see
2. Install the node if needed (see
3. Reconnect power cords and all external cables.

Air baffle replacement

Use the following information to remove and install the air baffle.

Remove the air baffle

Use this information to remove the air baffle.
To avoid possible danger, read and follow the following safety statement.
• S012
CAUTION:
Hot surface nearby.
Before you remove the air baffle, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• "Installation Guidelines" on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see
page 16).
3. Remove the node from the enclosure if needed (see
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
50
"Install the PCIe riser assembly" on page 106
"Install a node" on page
"Remove a node" on page
101).
"Power off the server" on
for instructions).
98).