Install The Rubber Feet - Lenovo ThinkSystem SE350 Maintenance Manual
Hide thumbs
Also See for ThinkSystem SE350:
- Configuration & installation manual (24 pages) ,
- Manual (12 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
Step 1.
Remove the rubber feet by pulling it out of the server, be careful when server is placed
upsidedown.
Figure 128. Rubber feet removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the rubber feet
Use this information to install the rubber feet.
Before you install the rubber feet, complete the following steps:
1. Read the following sections to ensure that you work safely.
•
"Safety" on page iii
•
"Installation Guidelines" on page 37
2. Turn off the server. Disconnect the power cords and all external cables (see
page
16).
To install the rubber feet, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
DkEpH4SzvKZck4f6rVRzUE
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
120
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Power off the server" on
Advertisement
Table of Contents
