Lom Packages - Lenovo ThinkSystem SE350 Maintenance Manual
Hide thumbs
Also See for ThinkSystem SE350:
- Configuration & installation manual (24 pages) ,
- Manual (12 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
Figure 13. System-board connectors
Table 12. System-board connectors
Front operator panel connector
1
3V Battery (CR2032)
2
Fan 1 connector
3
Fan 2 connector
4
Fan 3 connector
5
M.2 boot adapter connector
6
Power distribution module connector
7
LOM packages
The following illustrations show the wireless enabled LOM package, 10G SFP+ LOM package, and 10G
BASE-T LOM Package.
Depending on the server configuration, connect one of the LOM packages to the LOM module connector on
the system board (see
"System-board connectors" on page
Wireless enabled LOM package
Wireless enabled LOM package enables the wireless function of the server. The connector on the package is
designed for M.2 WLAN/LTE wireless adapter. There are two types of the wireless adapter, both are installed
in the same method. For more information, see
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Maintenance Manual
24
Lock switch connector
8
Intrusion switch connector
9
Riser connector
10
SATA Cable connector
11
TPM connector
12
LOM module connector
13
23).
"Install the M.2 WLAN/LTE wireless adapter" on page
42.
Advertisement
Table of Contents
