Complete The Parts Replacement - Lenovo ThinkSystem SE350 Maintenance Manual

To install the TPM card (for Chinese Mainland only), complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
DkEpH4SzvKZck4f6rVRzUE
Step 1. Insert the TPM card into the TPM card connector on the system board.
Notes:
• Carefully handle the TPM card by its edges.
• Your TPM card might look slightly different from the illustration.
Figure 153. TPM card (for Chinese Mainland only) installation
After you install the TPM card (for Chinese Mainland only), complete the following steps:
1. Install the node if needed (see
2. Reconnect power cords and all external cables.

Complete the parts replacement

Use this information to complete the parts replacement.
To complete the parts replacement, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your server.
2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information
for each component.
3. If you have removed the server cover, reinstall it. See
4. Reconnect external cables and power cords to the server.
Attention: To avoid component damage, connect the power cords last.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Install a node" on page 101).
"Install the top cover" on page
.
Chapter 3 Hardware replacement procedures
141.
145