Important Safety Instructions; Read And Save These Instructions; Setting Up The Elliptical Total Body; Installation Requirements - Matrix Elliptical total body Owner's Manual

1.0 I S I
MPORTANT AFETY

READ AND SAVE THESE INSTRUCTIONS

. .
. . This Elliptical total body is intended for commercial use
To insure your safety and protect the equipment, read all instructions before operating
the MATRIX Elliptical total body.
When using an electrical product, basic precautions should always be followed, including
the following:
. .
DANGER To reduce the risk of electric shock:
Always unplug this equipment from the electrical outlet immediately after using and
before cleaning.
Your MATRIX Elliptical total body is self-generating (requiring no external power source)
and must be pedaled to power up the console.
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons that may
. .
be associated with using this product:
An appliance should never be left unattended when plugged in. Unplug from outlet when
. .
not in use and before putting on or taking off parts.
This product must be used for its intended purpose described in this Owner's Guide. Do
not use other attachments that are not recommended by the manufacturer. Attachments
. .
may cause injury.
. .
To prevent electrical shock, never drop or insert any object into any opening.
Do not remove the side covers. Service should only be done by an authorized service tech-
. .
nician.
Never operate the Elliptical total body with the air opening blocked, Keep the air open-
. .
ing clean, free of lint, hair and the like.
Never operate product if it has damaged cord or plug, if it is not working properly, if it
has been damaged, or immersed in water. Return the unit to a service center for exami-
. . nation and repair.
. .
Do not carry this unit by supply cord or used cord as handle.
. . Keep any power cord away from heated surfaces.
. .
Keep hands and loose clothing away from moving parts.
Close supervision is necessary when Elliptical total body is used by or near children,
. . invalids, or disabled persons.
. . Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being
. . administered.
. . To disconnect, turn all controls to the off position, then remove plug from outlet.
Comment this Elliptical total body to a properly grounded outlet only.
CAUTION If you experience chest pain, nausea, dizziness or shortness of breath, STOP
exercising immediately and consult a physician before continuing.
NSTRUCTIONS

SETTING UP THE ELLIPTICAL TOTAL BODY

Assembly instructions have been provided with your Elliptical total body. For your safety,
please read and follow each of the steps in the assembly guide. To obtain a copy of the
assembly guide, please contact MATRIX FITNESS SYSTEMS or the local authorized deal-
ers.

1.1 INSTALLATION REQUIREMENTS

Your MATRIX Elliptical total body is designed to be self contained and does not require a
power supply to operate.
CAUTION Use of the wrong power supply may cause damage to your Elliptical total body
and/or entertainment device.
Locate a level stable surface to position Elliptical total body. The Elliptical total body has
six leveling feet located under the foot support. If your Elliptical total body wobbles in the
location where you intended to use it, loosen the lock nut on the adjusting foot and adjust
the feet until stable. Once level, lock the adjusting feet by tightening the lock nut to the
frame.

1.2 PREVENTATIVE MAINTENANCE AND CLEANING TIPS

Preventative maintenance and daily cleaning will prolong the life and look of your MATRIX
Elliptical total body.
Please read and follow these tips. . .
. .
Position the equipment away from direct sunlight. The intense UV light can cause discol-
. . oration or plastics.
. .
Locate your equipment in an area with cool temperatures and low humidity.
. . Clean with a soft 100% cotton cloth.
. .
Clean with non-ammonia based cleaners.
Wipe foot pads, handles, heart rate grips, and handlebars clean after each use.
. .
Do not pour liquids directly onto your equipment. This can cause damage to the equip-
. . ment and in the same cases electrocution.
. . Check pedal motion and stability.
Adjust leveling feet when equipment wobbles or rocks.
Maintain a clean area around equipment free from dust and dirt.
1