Chapter 2: Important Safety Instructions; Read And Save These Instructions; Electrical Requirements - Matrix E3X-01 Service Manual

cHaptEr 2: iMportant SafEty inStrUctionS

2.1 rEad and SaVE tHESE inStrUctionS

This Elliptical Trainer is intended for commercial use. To ensure
your safety and protect the equipment, read all instructions before
operating the MATRIX Elliptical Trainer.
Remind the users that before undertaking any fitness program, they
should obtain complete physical examinations from their physicians.
If, at any time while exercising, the user experiences dizziness,
pain, or shortness of breath, nausea or feels faint, he or she must
stop immediately.
• T his product must be used for its intended purpose
described in this service manual. Do not use other
attachments that are not recommend by the manufacturer.
Attachments may cause injury.
• T o prevent electrical shock, never drop or insert any object
into any opening.
• D o not remove the console covers. Service should only be
done by an authorized service technician.
• C lose supervision is necessary when the Elliptical Trainer
is used by or near children or disable persons.
• Do not use outdoors.
• D o not operate where aerosol (spray) products are being
used or when oxygen is being administered.
• D o not use the equipment in any way other than designed or
intended by the manufacturer. It is imperative that all Matrix
Fitness Systems equipment is used properly to avoid injury.
• Keep hands and feet clear of moving parts at all times to
avoid injury.
• Unsupervised children must be kept away from this equip
ment.
• Do not wear loose clothing while on the equipment.
caUtion! If you experience chest pains, nausea, dizziness, or
shortness of breath, stop exercising immediately and consult
your physician before continuing.
caUtion! Any changes or modifications to this equipment
could void the product warranty.
2

2.2 ElEctrical rEqUirEMEntS

The Matrix E3x-01 Elliptical Trainer is designed to be self powered
and does not require an external power supply source to operate.
The battery in the console needs to be charged for 3-4 hours when
first installed. Until the battery is fully charged, the 30 second pause
feature may not function fully. The charging does not need to be
continuous for 3-4 hours, but over combined workouts equaling 3-4
hours.