Sfp Module Information - Planet GT-915A User Manual

4.3.1.2 SFP Module Information

This page shows the operational status, such as the transceiver type, speed, wavelength, optical output power, optical input
power, temperature, laser bias current and transceiver supply voltage in real time. The SFP Module Information page is shown
in Figure 4-30.
Object
• Port
• Type
• Speed
• Wave Length(nm)
• Distance (m)
• Temperature (C)
– SFP DDM Module Only
• Voltage (V)
– SFP DDM Module Only
• Current (mA)
– SFP DDM Module Only
• TX power (dBm)
– SFP DDM Module Only
• RX power (dBm)
– SFP DDM Module Only
Figure 4-30: SFP Module Information
Description
Display per port list.
Display the type of current SFP module; the possible types are:

1000BASE-SX/LX

100BASE-TX
Display the speed of current SFP module; the speed value or description is
obtained from the SFP module. Different vendors SFP modules might show
different speed information.
Display the wavelength of current SFP module; the wavelength value is obtained
from the SFP module. Use this column to check if the wavelength values of two
nodes match while the fiber connection fails.
Display the support distance of current SFP module; the distance value is
obtained from the SFP module.
Display the temperature of current SFP DDM module; the temperature value is
gotten from the SFP DDM module.
Display the voltage of current SFP DDM module; the voltage value is gotten from
the SFP DDM module.
Display the ampere of current SFP DDM module; the ampere value is gotten
from the SFP DDM module.
Display the TX power of current SFP DDM module; the TX power value is gotten
from the SFP DDM module.
Display the RX power of current SFP DDM module; the RX power value is gotten
from the SFP DDM module.
55
User's Manual of GT-915A