Table of Contents
Advertisement
4.4.3 Bandwidth Control
This page allows you to configure the incoming and outgoing bandwidth control settings for all switch ports as the bandwidth
control screen in
Figure 4-59
The page includes the following fields:
Object
• Port Selection
• Ingress Rate (kbps)
• (1-1000000)
• Egress Rate (kbps)
•
(1-1000000)
• Port
• Ingress Rate (kbps)
• Egress Rate (kbps)
Buttons
: press this button to take effect.
: press this button to refresh information.
appears.
Figure 4-59: Bandwidth Control Configuration Page Screenshot
Description
Select specific port for incoming and outgoing bandwidth control settings.
Controls the rate (unit: kbps) for the ingress rate. This value is restricted to
1-1000000. The default value is Unlimited.
Controls the rate (unit: kbps) for the egress rate. This value is restricted to
1-1000000. The default value is Unlimited.
Display per port list.
Display per port ingress rate setting value.
Display per port egress rate setting value.
89
User's Manual of GT-915A
Advertisement
Table of Contents
