Subscribe to Our Youtube Channel
Related Manuals for Planet GTP-805A
Summary of Contents for Planet GTP-805A
- Page 1 1000BASE-X to 10/100/1000BASE-T 802.3at PoE Media Converter GTP-805A User’s Manual...
- Page 2 PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred.
-
Page 3: Fcc Warning
FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 4 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision PLANET 1000BASE-X to 10/100/1000BASE-T 802.3at PoE+ Media Converter User’s Manual For Model: GTP-805A Rev 1.2 (October, 2016)
-
Page 5: Table Of Contents
6. PoE Function ..............14 7. LED Indication ..............16 8. Cable Connection Parameter ..........17 9. GTP-805A Technical Specifications ........18 APPENDIX A ............... 19 A.1 Device’s RJ45 Pin Assignments ........19 A.2 RJ45 Cable Pin Assignment ........20... -
Page 6: Overview
Injector (GTP-805A) and PoE PD (Powered Device) to transfer data and power simultaneously. The maximum distance between the Injector (GTP-805A) and PoE PD is 100 meters. The GTP-805A combines the Ethernet digital data with power over the twisted-pair cables as an IEEE 802.3at/802.3af Power over Ethernet Injector. -
Page 7: Checklist
2. Checklist Your GTP-805A box should contain the following items: l 1000BASE-X 10/100/1000BASE-T 802.3at Media Converter x 1 l User’s Manual x 1 l AC-DC Adapter (Input: 54V DC, 0.74A max.) x 1 If any of these are missing or damaged, please contact your dealer immediately;... -
Page 8: Product Outlook
Mini-GBIC Fiber TX PoE Media Converter Ethernet+DC In Use 1000X to 10/100/1000T Figure 3-1: Product Outlook of the GTP-805A Left View There are one RJ45 twisted-pair jack (auto-MDI/MDI-X), one fiber-optic connector (vary by model) and four LED indicators. 10/100/1000Base-T Mini-GBIC... - Page 9 It is turned on for LLCF and LLR detection but this feature is not operable when turned off. Please refer to the following sections for more. There is also one DC 52V ~ 56V power socket for the PoE+ Media Converter. 52V~56V DC Figure 3-3: Right View of the GTP-805A...
-
Page 10: Link Fault Passthrough (Lfp)
TP ports do not transmit a link signal until they receive a link signal from the opposite port. The diagram below shows a typical network configuration with a good link status using the GTP-805A for remote connectivity. Management Switch/Hub Media... - Page 11 ° LED unlit = no link * Units are shipped with the LFP function being disabled (OFF). Link Loss Return (LLR) The fiber ports of the GTP-805A have been designed with an LLR function for troubleshooting a remote connection. LLR works in conjunction with LLCF.
- Page 12 If one of the optical conductors is down (as shown in the diagram box below), the converter with LLR function will return a no-link condition to its link partner. With LLCF function also enabled, the no-link condition is carried forward to the switch/ hub where a trap is generated to the management station, and the administrator can then determine the source of the loss.
-
Page 13: Installing The Converter
GTP-805A will be attached. l Ensure that there is no activity in the network. l Attach fiber cable from the GTP-805A to the fiber network. l Attach a Cat.5/5e/6 UTP cable from the 10/100/1000BASE-T network to the RJ45 port on the GTP-805A. -
Page 14: Poe Function
Before your installation, it is recommended to check your network environment. If there is any IEEE 802.3at/802.3af devices that need to be powered on, the GTP-805A can provide you a way to supply power for this Ethernet device conveniently and easily. - Page 15 For the places hard to find the power inlet, the GTP-805A provides the easiest way to power your Ethernet devices such as PLANET IEEE 802.3at/802.3af Power over Ethernet Splitter (POE-152S/162S) with Internet Camera or PoE Wireless Access Point installed in a wide-range place.
-
Page 16: Led Indication
7. LED Indication System Color Function Light Green Indicate the device is powered. 10/100/1000BASE-T Port Color Function Indicate that the PoE+ Media Blink Converter is actively sending or receiving data over that port. LNK/ Green Indicate that the port is link up Light at 10/100/1000Mbps. -
Page 17: Cable Connection Parameter
8. Cable Connection Parameter The limitations are as below: Duplex Connection Limitation (max.) Twisted-pair Node to Node Half/Full 100 meters Node to Switch/Hub Multi/Single Mode Converters Node to Node GTP-805A: Full Node to Switch Vary on SFP module... -
Page 18: Gtp-805A Technical Specifications
9. GTP-805A Technical Specifications The GTP-805A comes with the following standard features: l Standard: IEEE 802.3/802.3u/802.3ab, 10/100/1000BASE-T and IEEE 802.3at/802.3af Power over Ethernet standard l Connectors: One RJ45 (auto-MDI/MDI-X) twisted-pair, EIA568 with PoE One fiber-optic connector type (vary with model) l Data Transfer Rate: 10/100/1000Mbps (TP), 1000Mbps... -
Page 19: Device's Rj45 Pin Assignments
APPENDIX A A.1 Device’s RJ45 Pin Assignments 1000Mbps, 1000BASE-T RJ45 Connector Pin Assignment Contact MDI-X BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- 10/100Mbps, 10/100BASE-TX RJ45 Connector Pin Assignment MDI Media Dependent MDI-X Media Dependent Contact Interface... -
Page 20: Rj45 Cable Pin Assignment
Implicit implementation of the crossover function within a twisted-pair cable, or at a wiring panel, while not expressly forbidden, is beyond the scope of this standard. A.2 RJ45 Cable Pin Assignment There are 8 wires on a standard UTP/STP cable and each wire is color-coded. -
Page 21: Fiber Optic Cable Connection Parameter
A.3 Fiber Optic Cable Connection Parameter The wiring details are shown below: Fiber Optic Patch Cables: Standard Fiber Type Cable Specification 1000BASE-SX Multi-mode 50/125μm or 62.5/125μm (850nm) Multi-mode 50/125μm or 62.5/125μm 1000BASE-LX (1310nm) Single-mode 9/125μm... -
Page 22: Ec Declaration Of Conformity
*Model Number: GTP-802、GTP-802S、GTP -805A * Produced by: Planet Technology Corp. Manufacturer‘s Name : Manufacturer‘s Address: 10F ., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Mem ber States relating t o Electromagnetic Compatibility Directive on (2004/108/EC).
Need help?
Do you have a question about the GTP-805A and is the answer not in the manual?
Questions and answers