By default, the four DIP switches, set at the "ON"
position, are operated as "CPE". For operating
as "CO", please turn DIP 1 Switch to the "OFF"
position. Then adjust the other DIP switches
Note
accordingly to fulfill different network application
demands.
Please
making any transmission mode adjustment.
Note
3.3 Power Information
The central posts of the VDSL2 Bridge's power jacks measure
2.5mm wide that require +5VDC power input. They conform to
the bundled AC-DC adapter and Planet's media chassis. Should
you have the issue of power connection, please contact your
local sales representative.
Please keep the AC-DC adapter as a spare part when the
VC-231G/VC-231GF is installed to a media chassis.
Width of DC Receptacle: 2.5mm
2.5mm
+5V for each slot
DC receptacle is 2.5mm wide that matches the central
post, measuring 2.5mm wide, of the VDSL2 Bridge's DC
jack. Do not install any improper unit.
14
power off
the
VDSL2
Bridge
before