4.2.4 NTP Configuration
On this page. NTP, an acronym for Network Time Protocol, is for synchronizing the clocks of computer systems. NTP uses
UDP (data grams) as transport layer. You can specify NTP Servers and set GMT time zone. The NTP configuration screen in
Figure 4-23
appears.
The page includes the following fields:
Object
• System Time
• State
• Time Zone
•
Primary Server IP
•
Secondary Server IP
Button
: press this button to take effect.
Figure 4-23: NTP Settings Configuration Page Screenshot
Description
Display current system time of Managed Media Converter.
Indicates the NTP mode operation. Possible modes are:
Enable: Enable NTP mode operation. When enable NTP mode operation, the
agent forward and to transfer NTP messages between the clients and the
server when they are not on the same subnet domain.
Disable: Disable NTP mode operation.
Allow selecting the time zone according to current location of Managed Media
Converter.
Configure the NTP server IPv4 IP address on this page.
Configure the NTP server IPv4 IP address on this page.
50
User's Manual of GT-915A