Web Configuration; Main Menu - Planet ICS-100 User Manual

The ICS-10X Web Smart Media Converter provide Web interface for Converter smart function configuration and make the
Converter operate more effectively - They can be configured through the Web Browser. A network administrator can
manage and monitor the ICS-10x from the local LAN. This section indicates how to configure the Media Converter to
enable its smart function.

4.1 Main Menu

After a successful login, the main screen appears, the main screen displays the converter Welcome page. The screen in
Figure 4-1 appears.
As listed at the left of the main screen, the configurable smart functions are shown as below:
• System
• Network Configuration
• Operation Mode
• Serial Port Configuration
• SMTP

4. WEB CONFIGURATION

Figure 4-1 Web Main screen
Check the hardware, software version and System MAC address and IP address of
the converter. And the password changed firmware upgrade / Factory default /
system reboot.
Setup the IP address of the converter.
Setup the serial port mode: "TCP server", "TCP client", "UDP client", "Virtual COM",
"Telnet Server", "Pair Connection – Remote (Master)" and "Pair Connection –
Remote (Slave)".
Setup the serial port value.
Setup the SMTP mail parameters for further operation of events.
-17-
User's Manual of ICS-10x