Upgrade Instructions; Hardware Removal - Keysight Technologies X-Series Manual

Upgrade Instructions

Upgrade Instructions

Hardware Removal

Dress Cover Removal
1. Turn the instrument off and disconnect the power cord.
2. Referring to Figure
sides of the instrument and remove the strap handles.
Figure 2 Dress Cover Removal
3. Remove the four rear feet (4) by removing the four screws (3) and washers that attach them.
4. Remove the four bottom feet (6) by first removing the locking keys and then lifting the tabs
and sliding the foot toward the tabs.
5. Carefully slide the dress cover (5) off the instrument. This dress cover will not be reused.
8
2, remove the two screws (1) that attach the strap handles (2) from both
Installation Note N9042-90013