Mounting The Outdoor Unit - Samsung EHS AE050RXYDEG/EU Manual

5. Unit installation

Mounting the outdoor unit

The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration,
particularly if the outdoor unit is to be installed in a location exposed to strong winds or at a height, the unit must be fixed
to an appropriate support (wall or ground).
CAUTION
• When tightening the anchor bolt, tighten the rubber washer to prevent the outdoor unit bolt connection
part from corroding.
• Make a drain outlet around the base for outdoor unit drainage.
• If the outdoor unit is installed on the roof, you have to check the ceiling strength and waterproof the unit.
• The anchor bolt must be 20mm or higher from the base surface.
※ In order to prevent freezing of water drains, additional protection such as application of a heating cable
may be required.
Mono HT Quiet
Mono
Installer reference guide / Mono tank integrated type
A
Model
AE080BXYD**
AE120BXYD**
AE140BXYD**
AE050RXYDEG
AE080RXYD**
AE120BXYD**
AE160RXYD**
4 x
M12
B
A
620
660
620
B
344
338
344
36