Operating Basic Mode - Samsung EHS AE050RXYDEG/EU Manual

8. System configuration

Operating basic mode

Operating basic mode
Press the button to enter the Setting screen from the home screen with the Zone 1 or Zone 2 activated. On each
screen, press the and then press the
Outdoor 28.2 °
Zone1
Set
30
.0
°
Heat
Outdoor 28.2
°
Zone1
Set
30
.0
°
Heat
Auto mode
For indoor units set to automatic mode, the tank integrated hydro unit automatically adjusts the temperature of the
discharged water.
NOTE
• When WL is active, the target supply water temperature will be determined automatically depending on
the outdoor temperature: For the Heat mode, colder outdoor temperatures will result in warmer water.
Cool mode
You can adjust cooling temperature as you like with the Cool mode to cool indoor place.
• When selecting the Heat mode during the Cool mode, the Cool mode will be canceled.
Heat mode
Floor heating is available with the Heat mode by providing hot water in the spring, autumn and winter.
• You can check the defrost operation on the operation status menu under option.
• When selecting the Cool mode during the Heat mode, the Heat mode will be canceled.
Installer reference guide / Mono tank integrated type
or button to select any of Auto, Cool, and Heat modes.
07/30/2022 1:30 PM
Zone2 DHW
Set Set
24 45
.0 .0
° °
Heat Economic
07/30/2022 1:30 PM
Zone2 DHW
Set Set
24 45
.0 .0
° °
Heat Economic
Outdoor 28.2 ° 07/30/2022 1:30 PM
Zone1
Zone2 DHW
Set Set Set
24 45
30
.0 .0 .0
° ° °
Heat Heat Economic
Outdoor 28.2 07/30/2022 1:30 PM
°
Zone1
Zone2 DHW
Set Set
Set
24 45
30
.0 .0
.0
° °
°
Heat Heat Economic
Auto
Cool
Heat
157