Samsung EHS AE050RXYDEG/EU Manual page 149

8. System configuration
2) #502* : DHW Saving mode
Main Menu Sub Menu
(FSV) Function
Others
DHW Saving
FSV 50**
• DHW heating only by the heat pump to save energy (Operated in Eco mode of wired remote controller)
Target DHW temperature is lower than the temperature set by the user.
The temperature difference is defined by FSV #5021. (default: 5 °C) If the user sets the temperature 45 °C, the system
sets the target temperature 40 °C with the default setting.
– If the user wants an additional energy saving, use a "DHW Saving Mode" (#5022, default : 0, ON)
– The user can set the "Thermo On" temperature during "Saving mode" using FSV #5023.
Installer reference guide / Mono tank integrated type
40** | Heat
401* | Heat Pump
402* | Backup Heater
403* | Backup Boiler
404* | Mixing Valve
405* | Inverter Pump
406* | Zone Control
50** | Others
501* | Outing
502* | DHW Saving
503* | TDM Variable (TDM Product only)
504* | Power Peak Control
5051 | Frequency Ratio Control
5061 | Heat/DHW Capa. Ratio
508* | PV Control
509* | Smart Grid Control
Description
50** | Others
DHW Saving Temp.
501* | Outing
502* | DHW Saving
DHW Saving Mode
503* | TDM Variable (TDM Product only)
504* | Power Peak Control
DHW Saving Thermo on Temp.
5051 | Frequency Ratio Control
5061 | Heat/DHW Capa. Ratio
508* | PV Control
509* | Smart Grid Control
[FSV #5022="0"]
#5021
402* | Heat Pump
4021 | Application
4022 | Backup Heater/Booster Heater Priority
4023 | Cold Weather Compensation
4024 | Threshold Temp.
4025 | Defrost Backup Temp.
502* | DHW Saving
5021 | DHW Saving Temp.
5022 | DHW Saving Mode
5023 | DHW Saving Thermo on Temp.
FSV Step Unit Default
508* | PV Control
5021 1
5081 | Application.
5082 | Setting Temp. Shift Value(Cool)
5022 1
5083 | Setting Temp. Shift Value(Heat)
5023 1
DHW setting temp (°C)
DHW setting temp in DHW Saving mode (°C)
Min.
˚C 5 0
- 0 0
˚C 25 0
40*
40
40
40
40
40
40
50*
50
50
50
50
50
50
50
50
Max.
50*
40
50
50
1
50
50
40
50
50
50
50
148