Samsung EHS AE050RXYDEG/EU Manual page 159

8. System configuration
NOTE
• When setting standard cooling & heating temperature as indoor temperature, the Auto mode cannot be
selected.
Domestic Hot Water (DHW) mode
Press the button to enter the Setting screen from the home screen with the DHW activated. On each screen, press the
and then press the
Outdoor
Outdoor
NOTE
• When the DHW mode is not supported, "Not Supported" appears.
• To operate hot water mode, you need to set the hot water function 'Yes' in the field specification setting
mode (#3011) of wired remote controller.
• When the Cool/Heat mode and the DHW mode are selected at the same time, the Cool/Heat mode and
the DHW mode will operate alternately.
• (power operation) for the DHW mode cannot be used when the booster heater is not in use.
• If you want to enjoy a leisurely bath or need a lot of warm water urgently, select the Forced mode. When
this mode is enabled, it is assured that the full capacity of the heat pump is only delivered for domestic
water heating.
Installer reference guide / Mono tank integrated type
or button to select and use any of Economic, Standard, Power, and Forced modes.
28.2 07/30/2022 1:30 PM
°
Zone2 DHW
Zone1
Set Set Set
24 45
30
.0 .0
.0
° ° °
Heat Heat Economic
28.2 07/30/2022 1:30 PM
°
Zone1 Zone2 DHW
Set Set Set
24 45
30
.0 .0
.0
° °
°
Heat Heat Economic
Outdoor 28.2 07/30/2022 1:30 PM
°
Zone2 DHW
Zone1
Set Set
24 45
30
.0
.0
° °
Heat Heat
DHW
Set
84
Economic
Standard
Power
Forced
Set
.0
°
Economic
07/30/2022 1:30 PM
Current
.0 -2.4
°
°
Standard
158