operating basic function
TURNING THE AIR CONDITIONER ON AND OFF
Press the Power
button on the remote controller.
You will hear a ring and the air flow blade will move automatically when
the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode
used or Auto mode.
When you turn off the air conditioner, air flow blade will stop moving.
Turning on/off your air conditioner without the remote controller.
You can operate your air conditioner by pressing the Power
SELECTING OPERATION MODE
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending
on the room temperature detected by the room temperature sensor.
1. Turn on the air conditioner.
Press the Power
2. Set the operation mode.
Press the Mode button on the remote controller until
Auto mode and Auto fan speed indicator appear on the
remote controller display.
The air conditioner will automatically set the operation
mode to Cool or Heat depends on the room
temperature.
• Cooling only model(APN0A): Each time you
press the Mode button, the mode will change in order of Cool Auto Dry Fan.
• Heat pump model(APN1A): Each time you press the Mode button, the mode will
change in order of Auto Cool Dry Fan Heat.
3. Adjust the temperature (if you need to increase or
decrease the room temperature).
Press the Temp or button on the remote controller
to increase or decrease the desired temperature.
You can set the desired temperature between the
range of 18˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
• While the air conditioner is already operating in another mode, press the Mode button
until Auto mode indicator appears on the remote controller display.
• When you are using the remote controller, make sure correct indicator which matches
your selection appears on the remote controller display.
• Air flow can be adjusted manually (see page 19 for instructions).
14_ operating
button on the remote controller.
button on the indoor unit control panel.