Canister Assembly
1. Frame component
2. Hose (Fuel tank to canister)
3. Check valve
4. Hose (Canister to throttle body)
5. Hose (Canister to check valve)
6. Canister assembly
CABLE ROUTING
A. Insert the hose (Fuel tank to canister) and hose
(canister to check valve) until this surface.
B. White mark shall be directed upward.
C. Clip knob shall be directed upward.
D. Clip knob shall be set mark.
E. Blue mark shall be directed outside of the vehicle.
F. The end of pipe shall be installed until contact.
G. Clip knob shall be directed downword.
H. Collar should be installed from the front direction.
2-49
SPEC