Important Information; Preparation For Removal And Disassembly; Replacement Parts; Gaskets, Oil Seals And O-Rings - Yamaha R15 2022 Service Manual

EAS20009

IMPORTANT INFORMATION

EAS2000901
PREPARATION FOR REMOVAL AND
DISASSEMBLY
1. Before removal and disassembly, remove all
dirt, mud, dust and foreign material.
2. Use only the proper tools and cleaning equip-
ment.
3. When disassembling, always keep mated
parts together. This includes gears, cylinders,
pistons and other parts that have been "mat-
ed" through normal wear. Mated parts must
always be reused or replaced as an assem-
bly.
4. During disassembly, clean all of the parts and
place them in trays in the order of disassem-
bly. This will speed up assembly and allow for
the correct installation of all parts.
5. Keep all parts away from any source of fire.
EAS2000902

REPLACEMENT PARTS

Use only genuine Yamaha parts for all replace-
ments. Use oil and grease recommended by
Yamaha for all lubrication jobs. Other brands
may be similar in function and appearance, but
inferior in quality.
IMPORTANT INFORMATION
EAS2000903

GASKETS, OIL SEALS AND O-RINGS

1. When overhauling the engine, replace all
2. During reassembly, properly oil all mating
1. Oil
2. Lip
3. Spring
4. Grease
EAS2000904
LOCK WASHERS/PLATES AND COTTER
PINS
After removal, replace all lock washers/plates
"1" and cotter pins. After the bolt or nut has been
tightened to specification, bend the lock tabs
along a flat of the bolt or nut.
1-34
gaskets, seals and O-rings. All gasket surfac-
es, oil seal lips and O-rings must be cleaned.
parts and bearings and lubricate the oil seal
lips with grease.
GEN
INFO
1