Handlebar Switches - Yamaha R15 2022 Service Manual

EAU1234R

HANDLEBAR SWITCHES

Left
1
1
2
2
3
3
ZAUE3356
1. Dimmer/Pass switch "
2. Turn signal switch "
3. Horn switch " "
Right
ZAUE4507
1. Stop/Run/Start switch "
2. Hazard lights switch "
3. "TRIP/INFO" switch
EAU54203
Dimmer/Pass switch "
Set this switch to "
to " " for the low beam.
To flash the high beam, push the switch down
towards "PASS" while the headlights are on low
beam.
EAU12461
Turn signal switch " / "
To signal a right-hand turn, push this switch
to " ". To signal a left-hand turn, push this
switch to " ". When released, the switch re-
turns to the center position. To cancel the turn
signal lights, push the switch in after it has re-
turned to the center position.
EAU12501
Horn switch " "
Press this switch to sound the horn.
/ /PASS"
/ "
1
2
3
/ / "
/
"
/ /PASS"
" for the high beam and
FEATURES
EAU54213
Stop/Run/Start switch " / / "
To crank the engine with the starter, set this
switch to " ", and then push the switch down
towards " ".
Set this switch to " " to stop the engine in case
of an emergency, such as when the vehicle
overturns or when the throttle cable is stuck.
EAUN2211
Hazard lights switch " /OFF"
The hazard lights (simultaneous flashing of all
turn signal lights) are used in case of an emer-
gency, such as to warn other drivers when your
vehicle is stopped where it might be a traffic haz-
ard.
Set this switch to " " to turn on the hazard lights.
To turn off the hazard lights, set the switch to
"OFF".
ECA10062
Do not use the hazard lights for an extended
length of time with the engine not running,
otherwise the battery may discharge.
EAU78491
"TRIP/INFO" switch
This switch is used to make setting and display
changes in the multi-function meter unit.
To use the "TRIP" switch, move the "TRIP/INFO"
switch in direction (a). To use the "INFO" switch,
move the "TRIP/INFO" switch in direction (b).
ZAUE4465
1. "TRIP/INFO" switch
1-23
GEN
INFO
(a) (b)
1