Writing And Sending A New Message - NEC e606 Product Manual

Item
Reset Settings
Reset Message

Writing and Sending a New Message

The following describes basic operations and useful tips when writing and sending a new message.
Basic Operations
The basic operations for writing and sending a message are shown below:
To Write and Send a New Text Message
To
1 Start the message function
2 Display Create Msg
for Text message
3 Input the message text
4 Set the addressee
5 Send the message
Description
Resets all message related settings in e606 (not the USIM card).
Resets all message related settings in e606 and deletes all
messages, headers and endings.
Do this
Press the SK1 (Message) key, or press the MENU key and
select Message.
Select Create Message.
On Create Msg displayed, select Text Message.
New messages is displayed.
Select Message, input the message and press the Enter key
(160 characters max.).
Select To, input the addressee's phone number and press the
Enter key.
Note : To set the addressee from the Contacts, refer to Setting
the addressee from the contact entries on page 69.
Press the SK1 (Send) key.
The message is sent and saved in the Sent Items.
-66-
Message