Test Timing - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
Unscrew locking screw "TDC" bore at the cylinder block - tight‐
ening torque
Note
Locking screw with integrated gasket ring
♦
Replace if damaged
♦
– Tighten bolts -arrows- to 30 Nm.
2.3

Test timing

Special tools and workshop equipment required
♦ Fixing screw - T10340-
♦ Camshaft clamp - T10477-
♦ Spark plug wrench , e.g. -3122 B-
Work procedure
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 66 .
– Drain coolant ⇒ page 148
– Remove air filter housing
– Unscrew screws -A...D- and push thermostat cover -1- to the
side.
– Expose wiring loom -arrows-.
– Unscrew screws -1- and -3- and remove toothed belt guard
-2- for coolant pump toothed belt.
88
Rep. gr.15 - Cylinder head, valve gear
.
⇒ page 235 .