Copyright Notice - NEC e228 Product Manual

Nec e228: user guide
Table of Contents

Advertisement

When you set the memory card erasure prevention switch to "LOCK", data cannot be recorded, edited or erased. Use
this lock function when using the card with other devices, such as a PC.
Use a sharp object, such as a ballpoint pen, to move the erasure prevention switch.
Data may be damaged if:
- you remove the memory card or turn off the phone while it is reading or writing data.
- you use the memory card in a location subject to the effects of static electricity or electric noise.
We recommend that you make a backup copy of important data that you record on the memory card. To make a backup,
copy the data to a PC hard disk, etc.
Do not write forcefully on the memo area.
Carry and store the memory card in its case.
To avoid damage or contamination, do not touch the memory card's connector
Prevent dust, dirt and/or foreign objects from getting into the adapter.
Do not strike, bend or drop the memory card.
Do not disassemble or modify the memory card.
Do not allow the memory card to get wet.
Do not store the memory card in a location that is:
- extremely hot, such as in a car parked in the sun.
- under direct sunlight.
- very humid or subject to corrosive substances.
Data read/write speed may vary depending on the combination of the memory card and "Memory Stick Duo" compliant
product you use.
Do not insert the memory card directly into standard "Memory Stick" compliant products.
Insert the memory card fully into the adapter until it clicks into place. Otherwise, it will not operate correctly.

Copyright Notice

The video/audio recordings you make/download are protected by copyright laws. They are for personal use only and must
not be otherwise used without the permission of the copyright owner.
Important Safety Information
PL-6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents