Camera Settings; To Take A Photo - NEC e228 Product Manual

Camera Settings

Item
Recording mode
Zoom setting
Exposure setting

To Take a Photo

1
Press the SK1 (Camera) from the Home screen and press the SK1 (Photo) or select Take photo from Multimedia
centre. Press the Enter key to take a photo. When the self timer is turned on, a photo is taken after 10 seconds. You
can change the following settings:
To
Switch camera
Zoom in/out
Adjust the exposure rate
Use the Options menus
2
After taking a photo, the capture completion screen appears. You can do the following from this screen:
To
Send the file attached to a Multimedia
message/Email
Return to the capture preview to take a
new photo
Use the Options menus
•
Rename the file
Using the Multimedia Centre
Description
Switches the photo/video capture function when you press the SK1
(Photo/Video).
Turns the zoom function on/off when you press the Right or Left key.
Note: You cannot use the zoom function when the image size is set to
Large (352x288) when using the Inward camera, or X large
(640x480) when using the Outward camera.
Changes the exposure rate when you press the Up and Down keys.
Do this
Press the Options menu key and select Switch camera to switch
between Inward/Outward cameras.
Turn the zoom function on/off by pressing the Right or Left key.
Note: You cannot use the zoom function when the image size is set to
Large (352x288) when using Inward camera, or X large
(640x480) when using Outward camera.
Press the Up and Down keys to adjust the exposure rate.
Refer to Camera Options menu on page 97 for details.
Do this
Press the SK1 (Send).
Note: Refer to Writing and Sending a New Message on page 43 for
details.
Press the SK2 (Back).
Press the Options menu key and select Rename.
-98-