Making And Receiving A Video Call; To Make A Video Call To A Video Capable Phone - NEC e228 Product Manual

To
Activate Settings
Receive a third call

Making and Receiving a Video Call

Available in 3G coverage only
For further information on changing the default settings for a video call, refer to Video calls on page 64.

To Make a Video Call to a Video Capable phone

To
1 Enter a phone number
2 Start the video call
3 Talk and focus the camera
4 End the call
Do This
Press the Options menu key and select Settings to see the following
settings:
Auto answer: Turns on/off automatic answering.
Set answer key: Selects Use any key or Send key only as the call
answering key.
Auto redial: Turns on/off automatic redial.
Send DTMF tones: Enables/disables the sending of Dual Tone Multi
Frequency (DTMF) signals.
Divert to: Sets the phone number to forward the call to.
Mute: Turns on/off mute.
You can only receive a third call if you end one of the current/held calls.
Press the Options menu key and select the appropriate option to end
the current/held call.
Do This
Enter the phone number, using the keypad or the call logs. For further
information on Call Logs, refer to page 20.
Press the SK1 (Vid. call).
When the other party responds, hold the camera towards you and talk.
Adjust the camera position if necessary.
Note: Handsfree is set by default for video calls.
Press the End key.
-25-
Making and Receiving Calls