Setting Up Your E228; Usim Card; To Insert/Remove The Usim Card - NEC e228 Product Manual

Setting up your e228

This section explains how to prepare your phone for use.
Before you use your phone you must do the following:
•
Insert a valid USIM (Universal Subscriber Identity Module) card
•
Charge the battery
•
Insert the memory card (Memory Stick Duo™) in the side slot (optional)
•
Set the date and time
This section shows you what to do step by step.

USIM Card

3 provides you with a USIM card that must be inserted into your phone.
The USIM card holder is located underneath the battery. If the USIM card is removed, then the phone becomes unusable
until a valid USIM is inserted.
Always disconnect the charger and other accessories from your phone before inserting and removing your USIM card.

To Insert/Remove the USIM Card

Ensure that the power is off. If the power is on, press and hold the End (On-Off) key until power is off.
Insert/remove the USIM card as shown in the diagram on the next page.
-5-
Setting up your e228