Call Time Info; Call Options - NEC e228 Product Manual

Call time info.

Displays and sets the call time information.
Item
Current call time
Summary list
Voice calls
Video calls
Reset call timer

Call options

Item
Receiver volume
Quality alarm
Any key answer
Dial pause setting
Changing the Settings on your e228
Description
Allows you to change the call time display setting. Select Current call, Outgoing
calls, All calls or OFF.
Under the following items, the call time information is displayed in All calls,
Outgoing calls and Incoming calls.
Displays summary information for calls.
Displays voice call information.
Displays video call information.
Resets the call time to zero.
Description
Sets the volume level for receiving calls.
Turns the quality alarm on/off. This notifies you that your call may be disconnected if
you move into an area where there is a weak signal. Select No alarm, Loud alarm
and Soft alarm.
Turns the any key answer function on/off. This lets you use any key to answer a call,
except for the SK2 (Ignore), End (Reject call), Up and Down keys.
Edits a string of keypad characters (up to 127 single-byte characters) for pause
dialling. This function enables sending out of numbers while calling with pauses
inserted.
For example, after entering a number with the touch tone service, you can send out
the numbers you entered beforehand.
Pause dial entry function is useful for sending messages to a pager, etc. You can
only use keypad characters (0-9, # and
displayed as p). A pause at the beginning cannot be registered. A pause at the end
is deleted when registered. Registered pause dial entry can only be used while
calling. Sent out pause dial entries are not saved in the Outgoing calls list.
-62-
) and pause (press and hold the # key: