Other things you can do when editing text
To Enter a Space
To enter a space in the text in the Multitap Text Input mode or the T9® text input mode, press the 0 key.
To Insert a New Line
To insert a new line in the text, move the cursor to the insertion point of the new line, press and hold the # key. Alternatively,
press the Options menu key, New line.
To Change the Case
Press the
key to toggle between Shift (next letter in upper case), Caps Lock and Lower case (see diagram on page 33).
To Change to Delete/Backspace Mode
To change to delete/backspace mode, press the Options menu key, Editing options, then Delete or Backspace in Clear
mode.
In Delete mode, you can delete characters after the cursor. In Backspace mode, you can delete characters before the
cursor.
To Change to Insert/Overwrite Mode
To change to insert/overwrite mode, press the Options menu key, Editing options, then Insert or Overwrite in Write
mode.
To Copy/Cut and Paste the Text
To
1
Activate copy/cut
2
Specify the copy/cut starting point
3
Specify the copy/cut ending point
4
Specify the paste point
5
Paste the block
You can paste copied/cut text into other applications.
Entering Text
Do this
Press the Options menu key in the text input mode, then select Copy/Cut.
Move the cursor to the starting point by using the 4-way navigation key and
press the Enter key.
Note: You can cancel the specified copy/cut starting point by pressing the C key.
Move the cursor to the end by using the 4-way navigation key and press the
Enter key.
Note: The clipboard's maximum capacity is 1024 bytes.
Move the cursor to the paste point by using the 4-way navigation key.
Press the Options menu key, then select Paste.
-36-