Security; Locks; Set Codes - NEC e228 Product Manual

Security

Select Security or press 5 on User settings menu screen
Security settings allow you to turn on/off the dial lock and automatic lock. You can also change code numbers: PIN1/ PIN2,
the phone code and private PIN.

Locks

Item
Dial Lock
Auto lock

Set codes

Provides code number related settings.
Item
Activate PIN1
New PIN1/PIN2
Unblock PIN1/PIN2
New handset code
New private PIN
Changing the Settings on your e228
Description
This cancels any key operation except for making emergency calls, answering a call
with the Start key, rejecting a call with the End key, using the End key to turn the
e228 on/off, turning off the alarm with any key and adjusting the volume of the
earpiece. Note that you need a handset code to turn on/off Dial lock. Refer to New
handset code in Set codes on page 68 for details on the handset code.
You can also turn Dial lock on/off from the Home screen. Press the Options menu
key on the Home screen and select Dial lock.
Turns on/off the automatic lock function. With Auto lock on, the phone is protected
by Dial lock automatically when you switch on your phone. After entering PIN1, the
phone is locked.
Description
Selects Enable or Disable.
Changes the PIN1/PIN2 number. Enter the current PIN, the new PIN (4-8 digits) and
then the new PIN again for confirmation.
Displays the PIN1/PIN2 entry screen when e228 is turned on.
Note: If you enter your PIN incorrectly three times in a row, the USIM card is
locked. You can unlock it by using your Personal Unlock Key (PUK). Please
contact 3 for your PUK code.
Changes the handset code required to confirm important actions, such as deleting
all Contact list entries. This requires the Code Number to prevent accidental
mistakes.
To change the handset code, enter a new code (4 digits), then enter the new code
again for confirmation.
Note: When you buy your e228, the Code Number is set to 0000.
Changes the network password. Input the current password, the new password (4-8
digits) and then the new password again for confirmation.
Note: You need this password to change any call restrictions on your e228.
-68-