Synchronisation Options; To Register A Server - NEC e228 Product Manual

To
2 Start synchronisation
3 End synchronisation
Please check that this service is supported by your service provider - contact 3 for further details.

Synchronisation Options

Press the MENU key External connection
Item
Synchronise
Server settings
Synchronise all
Copy settings
Delete
Please check that this service is supported by your service provider - contact 3 for further details.

To Register a Server

The NEC e228 allows you to set up and synchronise with servers other than the default local and remote servers already
present. Up to 10 servers can be registered.
To do this, follow the steps below:
To
1 Start up the connection function
2 Select a server
Connecting your e228 to a PC
Do this
Select the remote server to synchronise, press the SK1 (Start).
The selected data is synchronised between your e228 and the remote
"3" server.
When the synchronisation is complete, the function ends.
Note: You can cancel the synchronisation operation by pressing the
End key.
Synchronisation Select a Server
Description
Starts the synchronisation of updated data with the selected server.
Displays the synchronisation server settings for the selected server.
Starts the synchronisation of all data with the selected server.
Copies the settings of the selected server and starts a new server setting
screen on the next vacant server entry.
Deletes the selected server information. When Server one to Server six
is selected, this operation returns the settings to the default values.
Do this
Press the MENU key
Synchronisation.
Select from Server one to Server ten or rename an existing server to
create a new entry.
-110-
Press 'Options menu' key
External connection select
.