8
en | Introduction
3
Introduction
3.1
Description
The controller is equipped with two independent interfaces for Wiegand type readers. It is
able to control one door with one reader in each direction and up to two doors with a reader
in one direction only.
Figure 3.1: Access Modular Controller
All necessary information for access verification is stored in a battery buffered on-board
memory and a Compact Flash (CF) memory card. This guarantees autonomous access
decisions and complete access registrations even if the management host system is offline.
The built in compact flash adapter provides adequate storage capability for cardholders and
events.
The electronics of the controller are completely covered by a plastic housing. The LCD (liquid
crystal display) provides all important status information.
Figure 3.2: Example
2022-11 | V05 |
Unsecured Area
Руководство по установке
Access Modular Controller 2
Bosch Security Systems B.V.
Need help?
Do you have a question about the Access Modular Controller 2 and is the answer not in the manual?
Questions and answers