Unmounting The Device From A Mounting Rail - Bosch Access Modular Controller 2 Manual

Access Modular Controller 2
4.2

Unmounting the device from a mounting rail

Notice!
i
To remove the controller from a mounting rail, first remove all pluggable connectors.
Push down the controller until the lower edge snaps out of the mounting rail [1]. Pull the
lower end of the controller from the mounting rail [2].
Figure 4.2: Unmounting the controller from a mounting rail
Bosch Security Systems B.V.
1
Руководство по установке
2
Installing | en 15
2022-11 | V05 |