Short Information - Bosch Access Modular Controller 2 Manual

Access Modular Controller 2
2

Short information

This controller is able to control up to two Wiegand card readers.
It is designed to fully process the access logic at assigned access points. Access points
consist of doors, gates, barriers, turn stiles, revolving doors, mantraps, ID card readers, door
opening elements and sensors.
All the product versions use encrypted connections between the access modular controller
and the host system.
The controller stores all necessary information in a battery-buffered memory and in a compact
flash storage element. Even when the unit is offline, it is able to perform:
–
–
–
–
The Access Modular Controller (AMC) is supported by the Access Professional Edition (APE),
BIS Access Engine (ACE) and the Access Management System (AMS).
For the latest information about our products, visit our online product catalog:
www.boschsecurity.com/xc/en/product-catalog/
Manufacturing dates
For product manufacturing dates, go to
serial number on the product label.
Remarks
This hardware is part of a security system.
Access should be granted to authorized people only.
Some states do not allow the exclusion or limitation of implied warranties, or limitation of
liability for incidental or consequential damages, hence the above limitation or exclusion might
not apply to you.
If you need further assistance or have any questions, contact:
Bosch Security Systems B.V.
Torenallee 49
5617 BA Eindhoven
Netherlands
www.boschsecurity.com
© Bosch Security Systems B.V., 2020
Bosch Security Systems B.V.
Independent status and authorization checks on access points
Take access decisions
Activate and deactivate connected peripheral elements
Detect and register all relevant events
Руководство по установке
www.boschsecurity.com/datecodes/
Short information | en 7
and refer to the
2022-11 | V05 |